8:00a.m. until 5:00p.m. Monday through Friday
Location:The E. Lingle Craig Preservation Lab is not generally open to the public, but the staff give frequent tours and workshops. For more information, please contact the Interim Head of the Preservation Lab, Mechael Charbonneau.
The E. Lingle Craig Preservation Laboratory is located at 851 North Range Road, Bloomington, IN 47408:
If you are traveling via automobile from the Herman B Wells Library drive East on 10th street towards the IN 45/46 Bypass. Cross over 45/46 and continue to the stop light at the intersection of 10th street and Range Road (to your left) / Pete Ellis Drive (to your right). Turn left onto Range Road and follow the road past the curve to the left. The Preservation Lab is located in the Ruth Lilly Auxiliary Library Facility. Indiana University C and E permit parking as well as handicapped parking are all available.
#6 and #9 Campus buses stop on 10th Street near our location. Approximately 5 minutes additional walking is required.
Step in through the front doors into the vestibule. On the east wall, the left side as you face into the lab, there is a phone to ring into the work areas. Select the button marked "Preservation" then press the "Call" button to ring the Preservation Lab. A staff member will meet you at the door.
Mechael Charbonneau, Interim Head of Preservation
Our main Lab number is 812-856-0991
Alternately, individual staff can be reached directly for assistance.
There are four functional sub-units within the Preservation Department. Each has its own page of staff and descriptions of the work they perform.
General description of the main areas of the Craig Preservation Lab
The main footprint for all of Preservation's lab, office, and storage spaces is approx. 60 x 100 feet, so about 6,000 SF of contiguous space, another room for water and mold remediation (209 SF), and 2 outside walk-in freezers. The main space is divided up into:
- General Collections Conservation lab (2,227 SF)
- Paper Conservation lab (516 SF)
- Special Collections Conservation lab (759 SF)
- Machine/dirty room (257 SF)
- Secure storage (140 SF)
- Photo documentation room (186 SF)
- Supply room (234 SF)
- Automated Box-making room (516 SF)
- Shared use office/processing space (952 SF)
- Two offices (203 and 130 SF)
We share with the Auxiliary Library Facility (ALF):
- conference room (230 SF)
- break room (224 SF)
- rest rooms/janitorial (432 SF)
- loading docks
Activities housed in Preservation are:
· General Collections Conservation
· Paper Conservation
· Automated box-making
· Water and mold remediation
· Special collections conservation and exhibit prep
· Commercial Binding Preparation
Below is a copy of the floor plan for the E. Lingle Craig Preservation Lab as it was originally conceived. However not all of the functions that were planned for were implemented. Reformatting, shown in room 140K, is currently done as part of the Library’s IT department and is located in the Wells Library. Room 140K houses the Lab’s copier, printer and a scanner that is used for replacement pages as well as a general purpose workstation.
Descriptions and photos of the main room of the Craig Lab are as follows. For a more complete discussion of the activities of each of the main units of the E. Lingle Craig Preservation Lab, please see their respective information pages elsewhere on this site.
Room 140 – General Preservation Workroom
The General Collections Workroom is where most of the work on the circulating collections takes place. Two full-time conservation technicians have their benches in this area along with the work space for the Head of General Preservation and Conservation Services. In addition, there are several work areas for our hourly staff.Equipment:
Board shear, ~56"
4 map cases end-to-end and counter top
Very long work table (equal length to the 4 map cases)
1 large press; 6 small presses
3 u-shaped benches (2 techs., head)
3 benches at a long counter (students work there, and at long table)
Room 140G – Special Collections Workroom
The Special Collections Workroom is a shared space where the Lilly Library conservation staff are located when their work brings them to the Lab (much of their work is focused on the Lilly Library exhibition program and so much of their work is done in the Lilly Library). In addition, the staff of the Paper Lab use the large flat space to do much of their mending and repairs of larger works and also make heavy use of the ultrasonic wielder for encapsulating maps and posters as needed and which is located in this room.
Board shear ~44"
Four map cases w/ counter tops
Two u-shaped benches
Three benches at a long counter
Room 140F: The Paper Lab, aka the Wet Lab
Standard sink and counter
Two map cases w/ counter tops
Two table-height treatment tables
Deionizing water filtration
Enclosures, Room 140A, houses not only the automated box-making machine, but also the guillotine plus much of the board stock used to make enclosures.
Work Room, Room 140E, is largely a machine/dirty room in which can be found:
Water and mold remediation room is not marked on the floor plan and is located just outside the Lab itself. In it there are:
Wei T'o freezer
Disaster response equipment
In addition there are two outdoor walk-in freezers, each approximately 12' x 8' x 10'.